Tag Archives: Extractor Fan

How to Clean a Window Extractor Fan

When you have a window extractor fan then they could be a useful tool for your kitchen or your bathroom; getting a window extractor fan is something which is not just useful but can’t be quite simple to install also.  You don’t need to drill a hole in your wall but rather will be to mount it through your window.

These fans will be trying to take out all of the air from your house and back outside but doing this can mean that they can become more prone to get build up on the inside; they will begin to get a lot of things from your home sucked up through the vent, it will be the dust and dirt meaning the fan gets a lot of build up in the fan which needs to be cleaned a.sap.

You can find the right things though to help you when it comes to cleaning these window extractor fans but if you follow these simple instructions then cleaning your fan can be made easier.

Window Extractor Fan How to Clean a Window Extractor Fan

Tools and Materials Needed

  • Vacuum
  • Duster
  • Soapy Water
  • Polish
  • Sponge
  • Scourer

Step 1 – Safety First

It is never needed to be said but just for a recap you should always have your electricity power sources turned off.  This should be turned off before you think about working on your fan because you don’t want to injure yourself by getting electrocuted.

Step 2 – Cleaning the Casing

To clean the casing of the fan you should get a mixture of hot water along with some washing up liquid into a bowl and get a scourer and sponge so that you can clean off the dirt from the fan easily.  You should try to be as soft as you can so that you don’t damage the fan itself.

So using your sponge first should be what you use but if you find there are just some little spills that wont remove themselves then try your scourer but not too hard otherwise you might damage the fan.  A little hard work is needed for the cleaning part, especially if it is stubborn and won’t move.  You should be able to get the dirt from the fan though, it might take a while but the strains will be washed away sooner or later.

Step 3 – Polish

Get some polish and a duster to help make the surface of the fan look a little bit better; it won’t take long however if you use a strong cleaner.  You can just put some polish on a duster and start to clean; you can buff it up as much or as little as you would like.

Step 4 – Vacuum

You should get a vacuum cleaner to finish off the inside of the vent because there can be a lot of dust that you and your duster can’t get to but with a vacuum cleaner then they could get the rest from the vent.  Use the slimiest part of your vacuum so that you can get right into the vent.

Step 5 – Outside

You could use your vacuum to clean both in and out of the vent; it would be best to firstly use hot soapy water for the outside of the vent, cleaning on the outside is easy to do more so than what it is to clean inside of the vent.  You could just wipe the dirt away.

Step 6 – Replacement

If you think that the window extractor fan is still not working as you think it should be then you should think about getting a replacement.  Getting a new fan could be the only way to go but if you are then try to get the same model of the fan that you already have so you won’t have to do any extra work.

How to Clean a Mixed Flow Extractor Fan

When you have a mixed flow extractor fan then you are going to have to work hard to keep it working perfectly and prolonging its life by making sure that you have kept it clean and tidy.  The only problem with that is that it can be easy to build up; these can help your homes greatly but you do need to keep them cleaning often.

If you follow these few instructions then you could get your centrifugal extractor fan to run perfectly for a long time to come.

Tools and Materials Needed

  • Ladder
  • Rags
  • Washing detergent or a liquid soap
  • Vacuum cleaner
  • A broken or unusable toothbrush
  • Dry cloth

Mixed Flow Extractor Fan How to Clean a Mixed Flow Extractor Fan

    Step 1: Turn Off Unit

    You should make sure that your power source has been switched off from the main source of power; so that you don’t get yourself injured by the electricity of the fan.

    Step 2: Mix Cleaning Solution

    You are going to need a cleaning mixture; this will usually be something like hot water and some cleaning detergent.  Remember to wear your protective gloves when you are using the cleaning mixture so you don’t get any irritation on your skin; remember when you are cleaning you should be wearing protective items.

    Step 3: Lubrication of Bearings

    With a centrifugal extractor fan, the belt driven centrifugal fan is something that makes the air circulated making it easier to work of course.  When it comes to these fans then you are going to need two things; cleanliness and oiling; if you have an old fan then you will probably have sleeve bearings which help to oil the metal on metal surfaces.  They usually do this around six or seven times a year; this helps to stop any dirt from building so that your unit is going to keep working for longer.

    With newer models of these fans then they are going to have self oiling bearings but if they don’t work properly then you are going to have to replace the unit.

    Step 4: Cleaning the Blades

    The blades can have a lot of dirt and dust building up on them because they are prone to do so; if you are cleaning your blades regularly then it is going to reduce the risk of any debris building up it is always a good idea to get the blades cleaned out every month or two months at the most.

    When you have a smaller fan then it take over an hour or so because you need to remove all of the blades but when you have a bigger fan then it can take twice as long or more.

    Step 5: Reassemble Unit

    Now that you have cleaned your fan and your blades thoroughly then you will now need to put all of the parts back together where they were when you found them.  Your airflow will be better flowing; you should know what the safety rules are first before you clean out these units however.

    How to Clean a Kitchen Extractor Fan

    Many of us have a kitchen extractor fan; this helps to prevent fumes, smells and grease from building up in your kitchen and take it back outside.  This can help but the truth is that the fan might get clogged up easily so you are going to need to get this cleaned regularly so that your fan is going to work.  You can clean your kitchen extractor fan in a number of ways prolonging its life.

    Tools and Materials Needed

    • Soapy Water
    • Sponge
    • Polish
    • Dusters
    • Vacuum Cleaner
    • Screwdriver

    Kitchen Extractor Fan How to Clean a Kitchen Extractor Fan

      Safety

      Before you think about cleaning your extractor fan then you need to think about the safety of you; you are going to need to switch the power off from the main fuse box.  You don’t want to have an accident and get electrocuted; taking out the power means that you won’t get electrocuted.

      Step 1 – Unscrew the Vent

      After you have switched all of the power off then you will start by unscrewing your vent from the inside of your home and outside also; now the vent will usually only be attached with screws so unscrewing these are easy and quick to do.  After this you will remove the vents from both inside and out.

      Step 2 – Unclip the Fan

      Your fan is going to be attached to the internal part of the extractor fan so it could be that your vent is being attached by clippings so you will need to unclip the fan and remove the fan.  Sometimes the whole of the fan shouldn’t be removed because you have to be very careful when it comes to cleaning the actual fan – this will be the water you use.

      Step 3 – Wash the Housing

      You should wash the housing of the fan with hot and soapy water; you should remember that it is not a wise choice when it comes to trying to wash the fan by putting the electrical parts right into water because it could damage the fan beyond repair so using a cloth to clean the fan is the best idea.

      Step 4 – Clean the Fan

      Your blades of the fan can be a little dirty so that is when you get a duster and a can of polish and clean the fan but be careful when you are cleaning it.  You don’t want to get any water in the fan or any part of the fan including the motor; you really do need to avoid using a lot of water when cleaning the fan.

       How to Clean a Kitchen Extractor Fan

      Step 5 – Clean the Duct

      The truth is with your duct then a lot of things can accumulate inside of it; you should use a vacuum to finish cleaning the inside of the duct, using this will help clean out much of the dust.

      Step 6 – Reassemble

      Now that you have finished cleaning the fan then you should start putting the parts back into the extractor fan.  It should be reconstructed as to how it was when you opened it up so remember what you did to put it back together.  The last thing to do will be to test drives it to make sure that it is working.

      How to Clean a Centrifugal Extractor Fan

      Many of us have some sort of centrifugal extractor fan in our homes but to keep them in working order then you are going to have to make sure that they are in perfect working order.  If you know how to keep the fan clean then you can have your fan for longer and keep it working perfectly.

      Tools and Materials Needed

      • Ladder
      • Rags
      • Washing detergent or a liquid soap
      • Vacuum cleaner
      • A broken or unusable toothbrush
      • Dry cloth

       How to Clean a Centrifugal Extractor Fan

      • Turn Off Unit

      Your first step is not really something that should need to be said but for your safety of course remember when you are working with electricity to turn off all power

      When it comes to working with electricity then you should remember that you have to take safety in account and switch off the power to your centrifugal extractor fans.

      • Lubrication of Bearings

      With a centrifugal extractor fan, the blades help remove the air in the room but to keep it working you are going to need to keep on oiling the bearing and of course keeping the blades very clean.  There will usually be a label on your blades as to how you are supposed to be keeping your unit clean as well as being safe when you return power to the unit.  The label should be information saying when they should be cleaned and how often oil should be applied to the unit.

      A lot of older fans don’t have self oiling bearings meaning you are going to have to do it from hand but if you have a newer model then you might have to get a replacement.

      • Cleaning the Blades

      When you are cleaning your fan blades then they can be quite dangerous if you have not done this properly.  Most of your blades are going to be a little curved which will mean that your blade will probably be prone to getting more dirt attached to them that is why you need to make sure you clean them properly otherwise you are going to have a lot of problems when it comes to your fan.

      You should be cleaning the blades regularly in fact but it won’t take you an hour but you have to be careful.  You should be cleaning each of the blades separately and thoroughly; many of the fans today will allow you to take out the blades completely giving them a more thorough clean.  It shouldn’t take that long to clean the blades but it is a good idea to clean regularly and properly, even if you get your unit checked out every year or so or six months just so you know that you are cleaning it right and there is no problems.

      • Reassemble Unit

      This last part to finish off the cleaning procedure will be to reassemble the unit back together again.  All parts have to be returned to their original state in the fan; so before your blades can go back, everything else has to be put back into position.  Your fan blades will then go into place and make sure they are securely in their position.

      Now you can enjoy your centrifugal extractor fan because there is nothing that is clogging up the airflow of your blades.

      HINT: If you are unsure about when or how to clean your blades then many of the blades will have some warning labels on them which will detail you about cleaning them.

      How to Clean a Bathroom Extractor Fan

      When we have some problems in our bathrooms it could be advisable to get an extractor fan, they help to prevent the buildup of moisture in the air of the room and bring more ventilation into a room.  You might not even know you have got one if you don’t call you’re an extractor fan because it might be called an exhaust fan.  These are great to have when you have a bath or shower in a room because it can help stop any mildew or mould forming if this is worked properly.  If you do have one of these then you should remember to keep them clean and tidy so that they are kept in working condition.

      Tools and Materials You Will Need

      • Step Ladder
      • Windex
      • Bucket

      Clean Bathroom Extractor Fan How to Clean a Bathroom Extractor Fan

      • Screwdriver
      • Cloths, sponges
      • Anti-Bacterial Spray
      • Soap
      • Warm Water
      • Masking Tape

        Step 1: Turn Off the Electricity

        You need to find your circuit breaker so that you can turn off the power for the extractor fan; this should be done first so that you keep yourself safe when you are working with the fan.

        Step 2: Remove the Cover

        A lot of the extractor fans are going to have a cover or casing of some kind which is usually there to help protect the fan parts inside.  Get a ladder if you cannot reach it and start to remove the cover – many have been put into place with screws so you are going to need to remove them; remove the cover and into the bucket of water and put the screws onto masking tape.  Put your screws into the bucket when you have folded up your screws in the masking tape.

        Step 3: Locate the Exhaust Fan Blade

        You should locate your extractor fan and try to see inside it to your blade; you need to take out the blade completely so if it has been clipped into place then you need to take them off and place them into the bucket attached to masking tape.

        Step 4: Clean the Vent Cover

        You should get another bucket and get a mixture of soap and some hot water into the bucket and then once you have the mixture then you will need to take your vent cover and place it into the bucket and make sure it is completely soaked.  Take a cloth to make sure you wipe clean the dirt from the vent cover; once you have cleaned your vent cover then you remove it from your water and dry it with a cloth that is not going to be tough on the vent either.

        Step 5: Clean the Fan Blades

        To clean the fan blades then you should take a cloth and get some window cleaner onto the cloth and then try to clean up the blades of the fan.  You should also try to put some anti-bacterial spray on your blades so that you can prevent the buildup of any bacteria on your blade.  Make sure that you have dried the blades before you reinstall the fans.

        Step 6: Re-Install Unit

        You are going to need to reinstall your unit back into its rightful place.

        Step 7: Turn on Electricity

        The last part is easy, you just need to switch your electricity back on by putting your circuit breaker back on and there you have it, you’ve cleaned your bathroom extractor fan simple and quickly.

        Powered by WordPress | Maintained by: Expert How | Thanks to Mega HowTo