How to Make a Homemade Vaporizer

Vaporizers are devices that heat plants and herbs to the optimum temperature to extract the essence or active ingredient which could be beneficial for people with asthma, colds, and other respiratory problems. The vapor can be therapeutic and it helps in clearing lung passages. Vaporizers are also used in smoking tobacco: it heats the tobacco to the optimal temperature without combusting it, thus tars and carcinogens are eliminated. If you do not want to buy a vaporizer, you can make one at your very home using common household items. It’s very simple to make a homemade vaporizer without spending much money

What you will need:

  • light bulb
  • pet bottle
  • pen
  • Electric tape
  • nail

Instructions:

  • Using a knife take the metal off of the bottom of the bulb. Make sure you use a bulb that is stronger than 100 Watts to prevent explosion. On the bulb, you will see a black piece of ceramic placed between 2 metal parts. Cut the ceramic using the knife.  It should break. Plug the knife in the open whorl and start to twist it and cut off more pieces of ceramic to make the hole big enough.

 How to Make a Homemade Vaporizer

  • Wash the bulb. Clean the bulb using hot water.
  • Cut-off the the top portion of the plastic bottle. You need only the cylindrical neck of the bottle. Cut about half an inch under the screw top.
  • Attach the bottle neck on to the bulb hole with sealing tape. You can tighten them with a piece of cotton. You have just completed the body of the vaporizer.
  • Drill a hole in the bottle cover of the plastic bottle. Use a nail to drill a hole in the middle. The hole should be just the size of the pen.
  • Dismount a pen and use the slender, straw-like part. Insert this and screw the cover with straw onto the vaporizer body. The straw should penetrate into the bulb.
  • Test your new homemade vaporizer. Place Herbs inside the bulb and heat the bulb and check if the vaporizer works.

Tips:

You can use a pair of pliers and wire cutters instead for emptying and scraping the light bulb.

Use gloves when making the Homemade Vaporizer to prevent cuts.When testing your Home Made Vaporizer, wear some eye protective glasses. The bulb can crack by testing and glass particles can be thrown away into your eye.

Warning:

After vaporizing something, do not touch the bulb. The bulb can be very hot a minute or 2 after vaporization and can burn skin.


Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>

Powered by WordPress | Maintained by: Expert How | Thanks to Mega HowTo